The design of additively manufactured lattices to increase the functionality of medical implants
Eisenstein, Neil M.
Lawless, Bernard M.
Segarra, Miren A.
Shepherd, Duncan E.T.
Attallah, Moataz M.
Grover, Liam M.
Cox, Sophie C.
MetadataDangos cofnod eitem llawn
The rise of antibiotic resistant bacterial species is driving the requirement for medical devices that minimise infection risks. Antimicrobial functionality may be achieved by modifying the implant design to incorporate a reservoir that locally releases a therapeutic. For this approach to be successful it is critical that mechanical functionality of the implant is maintained. This study explores the opportunity to exploit the design flexibilities possible using additive manufacturing to develop porous lattices that maximise the volume available for drug loading while maintaining load-bearing capacity of a hip implant. Eight unit cell types were initially investigated and a volume fraction of 30% was identified as the lowest level at which all lattices met the design criteria in ISO 13314. Finite element analysis (FEA) identified three lattice types that exhibited significantly lower displacement (10-fold) compared with other designs; Schwartz primitive, Schwartz primitive pinched and cylinder grid. These lattices were additively manufactured in Ti-6Al-4V using selective laser melting. Each design exceeded the minimum strength requirements for orthopaedic hip implants according to ISO 7206-4. The Schwartz primitive (Pinched) lattice geometry, with 10% volume fill and a cubic unit cell period of 10, allowed the greatest void volume of all lattice designs whilst meeting the fatigue requirements for use in an orthopaedic implant (ISO 7206-4). This paper demonstrates an example of how additive manufacture may be exploited to add additional functionality to medical implants.
Materials Science and Engineering: C;
Burton, H.E., Eisenstein, N.M., Lawless, B.M., Jamshidi, P., Segarra, M.A., Addison, O., Shepherd, D.E., Attallah, M.M., Grover, L.M. and Cox, S.C. (2019) 'The design of additively manufactured lattices to increase the functionality of medical implants', Materials Science and Engineering: C, 94, pp.901-908.
Dynodwr Gwrthrych Digidol (DOI)https://doi.org/10.1016/j.msec.2018.10.052
Article published in Materials Science and Engineering: C, available at https://doi.org/10.1016/j.msec.2018.10.052
Cardiff Metropolitan University (Grant ID: Cardiff Metropolian (Internal))
Oni nodir yn wahanol, disgrifir trwydded yr eitem hon fel a ganlyn https://creativecommons.org/licenses/by-nc-nd/3.0/
Yn dangos eitemau sy’n perthyn drwy deitl, awdur, pwnc a chrynodeb.
Additively manufactured versus conventionally pressed cranioplasty implants: An accuracy comparison Peel, Sean; Eggbeer, Dominic; Burton, Hanna; Hanson, Hayley; Evans, Peter Llewellyn (Sage Journals, 2018-08-18)This article compared the accuracy of producing patient-specific cranioplasty implants using four different approaches. Benchmark geometry was designed to represent a cranium and a defect added simulating a craniectomy. ...
Surface Finish has a Critical Influence on Biofilm Formation and Mammalian Cell Attachment to Additively Manufactured Prosthetics Cox, Sophie; Jamshidi, Parastoo; Eisenstein, Neil; Webber, Mark; Burton, Hanna; Moakes, Richard; Addison, Owen; Attallah, Moataz; Shepherd, Duncan; Grover, Liam (ACS, 2017-06-12)Additive manufacturing (AM) technologies enable greater geometrical design freedom compared with subtractive processes. This flexibility has been used to manufacture patient-matched implants. Although the advantages of AM ...
Peel, Sean; Eggbeer, Dominic (2016)Purpose: The technical efficacy of, and clinical benefits from using Computer Aided Design (CAD) and Additive Manufacturing (AM) in the production of patient-specific devices (implants and guides) has been established. ...