Computer-aided methods for single stage fibrous dysplasia excision and reconstruction in the zygomatico-orbital complex
MetadataDangos cofnod eitem llawn
Computer Aided Design and Additive Manufacture (CAD/AM) technologies are sufficiently refined and meet the necessary regulatory requirements for routine incorporation into the medical field, with long-standing application in surgeries of the maxillofacial and craniofacial region. They have resulted in better medical care for patients, and faster, more accurate procedures. Despite ever-growing evidence about the advantages of computer aided planning, CAD and AM in surgery, detailed reporting on critical design decisions that enable methodological replication, and the development and establishment of guidelines to ensure safety, are limited. This paper presents a novel application of CAD and AM to a single stage resection and reconstruction of fibrous dysplasia in the zygoma and orbit. It is reported in sufficient fidelity to permit methods replication and design guideline developments in future cases, wherever they occur in the world. The collaborative approach included engineers, designers, surgeons and prosthetists to design patient-specific cutting guides and a custom implant. An iterative design process was used, until the desired shape and function were achieved, for both of the devices. The surgery followed the CAD plan precisely and without problems. Immediate post-operative subjective clinical judgements were of an excellent result. At 19 months post-op, a CT scan was undertaken to verify the clinical and technical outcomes. Dimensional analysis showed maximum deviation of 4.73 mm from the plan to the result, while CAD-Inspection showed that the deviations range between -0.1 and -0.8 mm, and that the majority of deviations are located around the –0.3 mm. Improvements are suggested and conclusions drawn regarding the design decisions considered critical to a successful outcome for this type of procedure in the future.
Rapid Prototyping Journal;
Budak, I., Kiralj, A., Sokac, M., Santosi, Z., Eggbeer, D. and Peel, S. (2019) 'Computer-aided methods for single-stage fibrous dysplasia excision and reconstruction in the zygomatico-orbital complex', Rapid Prototyping Journal. DOI: 10.1108/RPJ-05-2018-0116.
Dynodwr Gwrthrych Digidol (DOI)https://doi.org/10.1108/RPJ-05-2018-0116
Article published in Rapid Prototyping Journal in May 2019, available at: https://doi.org/10.1108/RPJ-05-2018-0116.
Cardiff Metropolitan University (Grant ID: Cardiff Metropolian (Internal))
Yn dangos eitemau sy’n perthyn drwy deitl, awdur, pwnc a chrynodeb.
Whicher, Anna (Cardiff Metropolitan University, 2016)In 2015, 15 of the 28 European Member States had design included in national innovation policy and design action plans were in operation in Denmark, Estonia, Finland, France and Latvia. Design is an approach to problem-solving ...
Investigation into the insights generated through the application of interactive prototyping during the early stages of the design process Culverhouse, Ian (University of Wales, 2012)The early stages of the product design process are defined as those when initial product concepts are conceived in accordance with a design brief. High numbers of ideas will be generated as designers iteratively develop ...
Whicher, Anna (Universidad do Vale de Rio dos Sinos, 2017-07-27)In 2015, 15 of the 28 European Member States had design included in national innovation policy and between 2012 and 2016, design action plans have been adopted by governments in Denmark, Estonia, Finland, France, Ireland ...