Evaluation of direct and indirect additive manufacture of maxillofacial prostheses
Sage © Institution of Mechanical Engineers
MetadataDangos cofnod eitem llawn
The efficacy of computer-aided technologies in the design and manufacture of maxillofacial prostheses has not been fully proven. This paper presents research into the evaluation of direct and indirect additive manufacture of a maxillofacial prosthesis against conventional laboratory-based techniques. An implant/magnet-retained nasal prosthesis case from a UK maxillofacial unit was selected as a case study. A benchmark prosthesis was fabricated using conventional laboratory-based techniques for comparison against additive manufactured prostheses. For the computer-aided workflow, photogrammetry, computer-aided design and additive manufacture (AM) methods were evaluated in direct prosthesis body fabrication and indirect production using an additively manufactured mould. Qualitative analysis of position, shape, colour and edge quality was undertaken. Mechanical testing to ISO standards was also used to compare the silicone rubber used in the conventional prosthesis with the AM material. Critical evaluation has shown that utilising a computer-aided workflow can produce a prosthesis body that is comparable to that produced using existing best practice. Technical limitations currently prevent the direct fabrication method demonstrated in this paper from being clinically viable. This research helps prosthesis providers understand the application of a computer-aided approach and guides technology developers and researchers to address the limitations identified.
Eggbeer, D., Bibb, R., Evans, P., Ji, L. (2012) 'Evaluation of direct and indirect additive manufacture of maxillofacial prostheses', Proceedings of the Institution of Mechanical Engineers, Part H, Journal of Engineering in Medicine, 226 (9), pp. 718 - 728
Dynodwr Gwrthrych Digidol (DOI)http://dx.doi.org/10.1177/0954411912451826
This article was published in the Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine [Sage © Institution of Mechanical Engineers] and the definitive version is available at: http://dx.doi.org/10.1177/0954411912451826
Yn dangos eitemau sy’n perthyn drwy deitl, awdur, pwnc a chrynodeb.
Eggbeer, Dominic; Bibb, Richard; Evans, P. (Matrix Marketing, 2007)Purpose – Maxillofacial Prosthetics is faced with increasing patient numbers and cost constraints leading to the need to explore whether computer-aided techniques can increase efficiency. This need was addressed through ...
Daniel, Steffan; Eggbeer, Dominic (Emerald, 2016-01-18)Purpose – This paper aims to present novel techniques for designing maxillofacial prostheses using computer-aided design (CAD) and additive manufacture (AM), focusing on the integration of osseointegrated retention ...
Orbital prosthesis wax pattern production using computer aided design and rapid prototyping techniques Eggbeer, Dominic; Bibb, Richard; Evans, P. (Matrix Marketing, 2004-09-01)This research explored the application of advanced, digital methods of designing facial prosthesis patterns and evaluated them though a clinical case study. The work was undertaken by PDR Medical Applications groups in a ...