Additively Manufactured Maxillofacial Implants & Guides - Achieving Routine Use
MetadataDangos cofnod eitem llawn
Purpose: The technical efficacy of, and clinical benefits from using Computer Aided Design (CAD) and Additive Manufacturing (AM) in the production of patient-specific devices (implants and guides) has been established. Despite this, they are still not in routine clinical use. With AM equipment and CAD tool costs largely outside of the clinician’s or designer’s control, the opportunity exists to explore design process improvement routes to facilitate routine health service implementation. This paper identifies the key design process factors acting as drivers or barriers to this aim. Methodology / approach: A literature review, new data from three separate clinical case studies, and experience from an institute working on collaborative research and commercial application of CAD/AM in the maxillofacial specialty were analysed to extract a list and formulate models of design process factors. Findings: A semi-digital design and fabrication process is currently the lowest cost and shortest duration for cranioplasty implant production. The key design process factor to address is the fidelity of the device design specification. Implications / limitations: Further research into the relative value of, and best methods to address the key factor is required; in order to work towards the development of new design tools. A wider range of benchmarked case studies is required to better generalise findings beyond one implant type. Originality / value: Design process factors are identified (building on previous work largely restricted to technical and clinical efficacy). Additionally, three implant design and fabrication workflows are directly compared for costs and time. Unusually, a design process failure is detailed. A new model is proposed – describing design process factor relationships and the desired impact of future design tools.
Rapid Prototyping Journal;Volume 22; Issue 1
Peel, S. and Eggbeer, D. (2016) 'Additively manufactured maxillofacial implants and guides – achieving routine use', Rapid Prototyping Journal, 22 (1), pp.189-199.
Dynodwr Gwrthrych Digidol (DOI)http://dx.doi.org/10.1108/RPJ-01-2014-0004
Yn dangos eitemau sy’n perthyn drwy deitl, awdur, pwnc a chrynodeb.
Surface Finish has a Critical Influence on Biofilm Formation and Mammalian Cell Attachment to Additively Manufactured Prosthetics Cox, Sophie; Jamshidi, Parastoo; Eisenstein, Neil; Webber, Mark; Burton, Hanna; Moakes, Richard; Addison, Owen; Attallah, Moataz; Shepherd, Duncan; Grover, Liam (ACS, 2017-06-12)Additive manufacturing (AM) technologies enable greater geometrical design freedom compared with subtractive processes. This flexibility has been used to manufacture patient-matched implants. Although the advantages of AM ...
Peel, Sean; Eggbeer, Dominic; Sugar, Adrian; Evans, Peter Llewellyn (Emerald, 2016)Purpose: Post-traumatic zygomatic osteotomy, fracture reduction, and orbital floor reconstruction poses many challenges for achieving a predictable, accurate, safe, and aesthetically pleasing result. This paper describes ...
Hesselmann, Ernst Friedrich Sebastian (Cardiff Metropolitan University, 2015)This thesis investigates factors which promote design management success and considers how design management capabilities in businesses and organisations can be assessed. The investigation is based on exploration and ...