Fabrication of a resin appliance with alloy components using digital technology without an analog impression
Al Mortadi, Noor
Williams, Robert J.
MetadataDangos cofnod eitem llawn
The aim of this study was to fabricate a resin appliance incorporating “wire” components without the use of an analog impression and dental casts using an intraoral scanner and computer technology to build the appliance. This unique alignment of technology offers an enormous reduction in the number of fabrication steps when compared with more traditional methods of manufacture. The prototype incorporated 2 Adams clasps and a fitted labial bow. The alloy components were built from cobalt-chromium in an initial powdered form using established digital technology methods and then inserted into a build of a resin base plate. This article reports the first known use of computer-aided design and additive manufacture to fabricate a resin and alloy appliance, and constitutes proof of the concept for such manufacturing. The original workflow described could be seen as an example for many other similar appliances, perhaps with active components. The scan data were imported into an appropriate specialized computer-aided design software, which was used in conjunction with a force feedback (haptic) interface. The appliance designs were then exported as stereolithography files and transferred to an additive manufacturing machine for fabrication. The results showed that the applied techniques may provide new manufacturing and design opportunities in orthodontics and highlights the need for intraoral-specific additive manufacture materials to be produced and tested for biocompatibility compliance. In a trial, the retainer was fitted orally and judged acceptable by the clinician according to the typical criteria when placing such appliances in situ.
American Journal of Orthodontics and Dentofacial Orthopedics
Al Mortadi, N., Jones, Q., Eggbeer, D., Lewis, J. & Williams, R.J. (2015) "Fabrication of a resin appliance with alloy components using digital technology without an analog impression", American Journal of Orthodontics and Dentofacial Orthopedics, 148(5), pp.862-867.
Dynodwr Gwrthrych Digidol (DOI)http://dx.doi.org/10.1016/j.ajodo.2015.06.014
This article was published in American Journal of Orthodontics and Dentofacial Orthopedics on 01 November 2015 (online), available at: http://dx.doi.org/10.1016/j.ajodo.2015.06.014.
HawliauCreative Commons Attribution Non-Commercial No Derivatives (CC BY-NC-ND 3.0) License
Oni nodir yn wahanol, disgrifir trwydded yr eitem hon fel a ganlyn Creative Commons Attribution Non-Commercial No Derivatives (CC BY-NC-ND 3.0) License
Yn dangos eitemau sy’n perthyn drwy deitl, awdur, pwnc a chrynodeb.
Comparison of virtual and physical dimensions in AM resin dental devices and fit of devices with conventionally produced base plates Al Mortadi, Noor; Eggbeer, Dominic; Lewis, Jeff; Williams, Robert (Emerald, 2018-02-15)Purpose – The purpose of this study is to develop and apply clinically relevant methods of analysing the accuracy of dental appliances fabricated using additive manufacture (AM) compared to the computer-aided design (CAD) ...
An investigation into the flexural strength of orthodontic acrylic resin by varying the embedded lengths of 0.7mm diameter wire Beard, Sarah Elizabeth (2018-05)The aim of this investigation was to determine if there was a correlation between the length of the tagging arms of the components in a removable orthodontic appliance, such as an Adams clasp, and the resulting flexural ...
Evaluating the Effect of Exogenous Acids Common to the Diet, on the Flexural Strength of Thermoplastic Retainers. Price, Daniel, John (2018-05)Objectives: The aim of this study was to investigate whether exogenous acids common to the diet effect the flexural strength of thermoplastic polymers, used for the fabrication of orthodontic retainers. Method and ...