Combining thermography and computer simulation to identify and assess insulation defects in the construction of building façades
MetadataDangos cofnod eitem llawn
Thermography is a non-destructive testing technique used to evaluate the thermal performance of buildings, typically post-construction. However, establishing objective criteria for the interpretation of test results is not straightforward and the process can appear subjective. In building design, computer modelling may be used to analyse the thermal performance of construction details, including the expected distribution of surface temperatures at junctions and openings. The objective of this paper is to explore how the two techniques may be used together to support the identification and assessment of insulation defects in the construction of building façades. Firstly, a literature review identifies the main parameters relevant to modelling heat transfer through construction details and also the parameters that influence the assessment of surface temperatures by thermography. Combining the two techniques can support thermal image interpretation and the assessment of defect severity. Procedures to ensure a consistent approach between the two techniques are developed. Two case studies demonstrate the application of these procedures and illustrate the complementary use of modelling and thermography in a practical context. The approach discussed in the paper could help to verify the as-built energy performance of new buildings by linking design predictions of thermal performance with thermographic testing.
Energy and Buildings;
Taylor, T., Counsell, J. & Gill, S. (2014) ‘Combining thermography and computer simulation to identify and assess insulation defects in the construction of building façades’. Energy and Buildings, 76, pp.130–142.
Dynodwr Gwrthrych Digidol (DOI)http://dx.doi.org/10.1016/j.enbuild.2014.02.080
Oni nodir yn wahanol, disgrifir trwydded yr eitem hon fel a ganlyn https://creativecommons.org/licenses/by-nc-nd/3.0/
Yn dangos eitemau sy’n perthyn drwy deitl, awdur, pwnc a chrynodeb.
Assessing the severity of workmanship defects using thermography and 2-D and 3-D heat transfer models Taylor, Tim; Counsell, John; Gill, Steve; Oakley, Gerraint (Verlag der Technischen Universität Graz, 2013-09)The effectiveness of insulation in reducing heat loss depends to an important extent on the quality of its installation. For new buildings, it is advantageous if the performance of insulation can be checked before construction ...
Assessing the thermal performance of buildings at the construction stage using thermography. Development and evaluation of a testing approach in the context of new housing in Wales Taylor, Tim (Cardiff Metropolitan University, 2014)At present there are concerns that new housing in the UK under-performs in terms of energy-efficiency. In research studies where the thermal performance of the building fabric has been measured, post-construction, significant ...
Energy efficiency is more than skin deep: Improving construction quality control in new-build housing using thermography Taylor, Tim; Counsell, John; Gill, Steve (Elsevier, 2013-11-01)Objective The objective of the research is to investigate the scope for testing the thermal performance of the building envelope during the construction process using thermography. The purpose of these tests is to enable ...