Post-traumatic zygomatic osteotomy and orbital floor reconstruction
Evans, Peter Llewellyn
MetadataDangos cofnod eitem llawn
Purpose: Post-traumatic zygomatic osteotomy, fracture reduction, and orbital floor reconstruction poses many challenges for achieving a predictable, accurate, safe, and aesthetically pleasing result. This paper describes the successful application of Computer Aided Design (CAD) and Additive Manufacturing (AM) to every stage of the process – from planning to surgery. Approach: A multi-disciplinary team was employed - comprising surgeons, prosthetists, technicians and designers. The patient’s Computed Tomography (CT) scan data was segmented for bone and exported to a CAD software package. Medical models were fabricated using AM for diagnosis, patient communication, and device verification. The surgical approach was modelled in the virtual environment and a custom surgical cutting guide, custom bone-repositioning guide, custom zygomatic implant, and a custom orbital floor implant each designed, prototyped, iterated and validated using polymer AM prior to final fabrication using metal AM. Findings: Post-operative clinical outcomes were as planned. The patient’s facial symmetry was improved and their inability to fully close their eyelid was corrected. The length of the operation was reduced relative to the surgical team’s previous experiences. Post-operative scan analysis indicated a maximum deviation from the planned location for the largest piece of mobilised bone of 3.65mm. As a result, the orbital floor implant which was fixed to this bone demonstrated a maximum deviation of 4.44mm from the plan. Originality / value: This represents the first application of CAD and AM to every stage of the process for this procedure - from diagnosis, to planning, and to surgery.
Rapid Prototyping Journal
Peel, Sean, Eggbeer, Dominic, Sugar, Adrian, Evans, Peter Llewelyn (2016) 'Post-traumatic zygomatic osteotomy and orbital floor reconstruction', Rapid Prototyping Journal, Vol. 22 (6), pp.878 - 886
Dynodwr Gwrthrych Digidol (DOI)http://dx.doi.org/10.1108/RPJ-03-2015-0037
This article was published in Rapid Prototyping Journal, available at http://dx.doi.org/10.1108/RPJ-03-2015-0037
Yn dangos eitemau sy’n perthyn drwy deitl, awdur, pwnc a chrynodeb.
Bibb, Richard; Eggbeer, Dominic; Evans, Peter; Bocca, Alan; Sugar, Adrian (Emerald Publishing, 2009)Purpose – The computer-aided design (CAD) and manufacture of custom-fitting surgical guides have been shown to provide an accurate means of transferring computer-aided planning to surgery. To date guides have been produced ...
Dermal Fillers - reasonable skin aging solution: Qualitative analysis of the attitude to dermal fillers in Bulgaria Kulcheva, Polina Krasimirova (Cardiff Metropolitan University, 2013)The purpose of this research paper is to critically examine the awareness of the Bulgarians of the Dermal Fillers, being a successful skin rejuvenating procedure. The research will concentrate on how the patients qualify ...
Ashford, Robert; Mathieson, Ian; Rome, Keith (Universidad Complutense de Madrid, 2016-04-14)Background. Adult pes planus (flat foot) is a common problem encountered by many health care professionals. Despite the perception that flat foot can cause pain and impair function, and the availability and widespread use ...