Show simple item record

dc.contributor.authorPuskar, Tatjana
dc.contributor.authorJevremovic, Danimir
dc.contributor.authorWilliams, Robert J
dc.contributor.authorEggbeer, Dominic
dc.contributor.authorVukelic, Djordje
dc.contributor.authorBudak, Igor
dc.date.accessioned2017-02-23T15:50:06Z
dc.date.available2017-02-23T15:50:06Z
dc.date.issued2014-09-11
dc.identifier.citationPuskar, T., Jevremovic, D., Williams, R.J., Eggbeer, D., Vukelic, D. and Budak, I. (2014) 'A comparative analysis of the corrosive effect of artificial saliva of variable pH on DMLS and cast Co-Cr-Mo dental alloy', Materials, 7(9), pp.6486-6501en_US
dc.identifier.urihttp://hdl.handle.net/10369/8372
dc.descriptionThis article was published in Materials on 11 September 2014 (online), available open access at http://dx.doi.org/10.3390/ma7096486en_US
dc.description.abstractAbstract: Dental alloys for direct metal laser sintering (DMLS) are available on the market today, but there is little scientific evidence reported on their characteristics. One of them is the release of ions, as an indicator of the corrosion characteristics of a dental alloy. Within this research, the difference in the elution of metals from DMLS and cast (CM) samples of Co-Cr-Mo dental alloy in saliva-like medium of three different pH was examined by inductively-coupled plasma mass spectrometry (ICP-MS). The obtained results show that the metal elution in artificial saliva from the DMLS alloy was lower than the elution from the CM alloy. The release of all investigated metal ions was influenced by the acidity, both from the DMLS and CM alloy, throughout the investigated period of 30 days. The change in acidity from a pH of 6.8 to a pH of 2.3 for the cast alloy led to a higher increase of the elution of Co, Cr and Mo from CM than from the DMLS alloy. The greatest release out of Co, Cr and Mo was for Co for both tested alloys. Further, the greatest release of all ions was measured at pH 2.3. In saliva of pH 2.3 and pH 4.5, the longer the investigated period, the higher the difference between the total metal ion release from the CM and DMLS alloys. Both alloys showed a safe level of elution according to the ISO definition in all investigated acidic environments.en_US
dc.language.isoenen_US
dc.publisherMDPI AGen_US
dc.relation.ispartofseriesMaterials;
dc.subjectdental alloysen_US
dc.subjectcorrosion resistanceen_US
dc.subjectdirect metal laser sintering (DMLS)en_US
dc.subjectCo-Cr-Mo alloyen_US
dc.titleA comparative analysis of the corrosive effect of artificial saliva of variable pH on DMLS and cast Co-Cr-Mo dental alloyen_US
dc.typeArticleen_US
dc.identifier.doihttp://dx.doi.org/10.3390/ma7096486
dcterms.dateAccepted2014-09-01
rioxxterms.funderCardiff Metropolitan Universityen_US
rioxxterms.identifier.projectCardiff Metropolian (Internal)en_US
rioxxterms.versionVoRen_US
rioxxterms.licenseref.urihttps://creativecommons.org/licenses/by-nc-sa/3.0/en_US
rioxxterms.licenseref.startdate2017-02-23
rioxxterms.funder.project37baf166-7129-4cd4-b6a1-507454d1372een_US


Files in this item

Thumbnail

This item appears in the following collection(s)

Show simple item record