Hyperspectral chemical imaging reveals spatially varied degradation of polycarbonate urethane (PCU) biomaterials
Espino, D. M.
MetadataDangos cofnod eitem llawn
Hyperspectral chemical imaging (HCI) is an emerging technique which combines spectroscopy with imaging. Unlike traditional point spectroscopy, which is used in the majority of polymer biomaterial degradation studies, HCI enables the acquisition of spatially localised spectra across the surface of a material in an objective manner. Here, we demonstrate that attenuated total reflectance Fourier transform infra-red (ATR-FTIR) HCI reveals spatial variation in the degradation of implantable polycarbonate urethane (PCU) biomaterials. It is also shown that HCI can detect possible defects in biomaterial formulation or specimen production; these spatially resolved images reveal regional or scattered spatial heterogeneity. Further, we demonstrate a map sampling method, which can be used in time-sensitive scenarios, allowing for the investigation of degradation across a larger component or component area. Unlike imaging, mapping does not produce a contiguous image, yet grants an insight into the spatial heterogeneity of the biomaterial across a larger area. These novel applications of HCI demonstrate its ability to assist in the detection of defective manufacturing components and lead to a deeper understanding of how a biomaterial’s chemical structure changes due to implantation. Statement of Signifance The human body is an aggressive environment for implantable devices and their biomaterial components. Polycarbonate urethane (PCU) biomaterials in particular were investigated in this study. Traditionally one or a few points on the PCU surface are analysed using ATR-FTIR spectroscopy. However the selection of acquisition points is susceptible to operator bias and critical information can be lost. This study utilises hyperspectral chemical imaging (HCI) to demonstrate that the degradation of a biomaterial varies spatially. Further, HCI revealed spatial variations of biomaterials that were not subjected to oxidative degradation leading to the possibility of HCI being used in the assessment of biomaterial formulation and/or component production.
Dorrepaal, R.M., Lawless, B.M., Burton, H.E., Espino, D.M., Shepherd, D.E. and Gowen, A.A. (2018) 'Hyperspectral chemical imaging reveals spatially varied degradation of polycarbonate urethane (PCU) biomaterials', Acta Biomaterialia, 73, pp. 81-89. https://doi.org/10.1016/j.actbio.2018.03.045
Dynodwr Gwrthrych Digidol (DOI)https://doi.org/10.1016/j.actbio.2018.03.045
This article was published in Acta Biomaterialia on 05 April 2018 (online), available at https://doi.org/10.1016/j.actbio.2018.03.045
Cardiff Metropolitan University (Grant ID: Cardiff Metropolian (Internal))
Yn dangos eitemau sy’n perthyn drwy deitl, awdur, pwnc a chrynodeb.
Abogrean, Elhadi (University of Wales, 2008)The issue of acid deposition and associated environmental problems has received special attention during recent decades and has been the subject of extensive research in a number of countries. However, there are no recent ...
PARTICLE-INDUCED OXIDATIVE DAMAGE FROM EXPOSURE TO AIRBORNE PM2.5 COMPONENTS IN THE VICINITY OF HONG KONG LANDFILLS Adams, Rachel; Berube, Kelly; Jones, Timothy Peter; Evans, Shelley-Ann; Ho, Kin Fai (Digilabs, 2018-05)Landfills are an essential component of Hong Kong’s waste management strategy. With a geographically small size and a large population it is inevitable that many residents will live proximal to landfill sites, and this has ...
Whida, Amal Masre (Cardiff Metropolitan University, 2009)Iron has an important role in the survival of nearly all microorganisms, therefore, one of the strategies used by the immune system in the fight against infection is to reduce iron availability. Thus, iron regulation is ...